"The blocks area did not load properly..."

(Diego Barreiro Pérez) #1

:warning: The blocks area did not load properly. Changes to the blocks for screen XXXXX_ScreenName will not be saved. :warning:

Describe your issue:

This error happens when opening an existing project in Makeroid Builder. All blocks disappear from the screen, or just throws lots of errors

Steps to reproduce the issue:

  1. Open an existing project
  2. Wait

Expected Behaviour:

The project should be loaded fine

Actual Behaviour:

Blocks are gone, or lots of errors thrown

Show Blocks

:exclamation:wait for milliseconds” block was used

(Diego Barreiro Pérez) #2


By now, there’s no “automatic” solution of this problem
However, you can download the AIA file and send it to us, and we’ll manually fix the issue

What we will do is to manually remove the “wait for milliseconds” block from your code

(Moustafa Mahmoud) #3

every block which contains “wait for milliseconds” disappeared in my project !!
Should i build them again ?!
and what about “wait for milliseconds” it will removed forever ?!!

(Nathan) #4


(Nathan) #5

For now most likely, it was causing the extension issue

(Daniel) #6

Umm, @Diego , a little typo :wink:

(Diego Barreiro Pérez) #7

Fixed :+1: