Problem with timer

[Jihed]

I have a timer that works as counters in the application. When the application stops working partially in a sleep mode, that means the counter stops and keeps the value, and when the application returns to work, the counter returns to work from that value, but sometimes errors occur as it does not return to that peak, but returns more or less than Is the problem and is there a solution?

[deanart2012 (Dean Artis)]

You should know by now to post your blocks etc.

[youssef_achour]

@Jihed

the counter stops and keeps the value, and when the application returns to work, the counter returns to work from that value

You cannot do that with the in-built Clock component, instead you may set the timer interval for 1 second and each time a second passes increase the stored value of seconds since start in TinyDB and with some calculations split it to hours, minutes or even days, there’s extensions for that too.

[bodymindpower (Anke)]

@Jihed

When the application stops working partially in a sleep mode

Try this app and check if it works also in idle (sleep) mode:
countdown_preventDoze.apk (5.3 MB)

[Still-learning (1-2-3-4...)]

If possible, have a look at this post too

Clock remains active when changing screen

here is very simple timer … it will work with the help of tinydb Untill user clears data [blocks(9)] Extension you can find it here created by by @vknow360 (PS: timer always fires and timer enabled must be untick from designer part of clock) [image]